Conair FC-33 Uživatelská příručka stáhnout pdf (Strana 51)

11.2 Third fixed knife

As an optional extra, the granulator can be equipped with a third fixed knife to

increase the efficiency of the granulator.

Open the hopper to install/remove the third fixed knife.

CF series-K, remove the rear guard plate over the motor and open the door.

Removal

1. Undo and remove the screws

(A) which hold the knife.

2. Remove the knife (B).

3. Clean the knife attachments

where the knife was installed.

Installation

1. Install the knife on the knife

attachment.

2. Screw in the socket cap screws

(A), so that the support rule (C)

lightly supports the knife.

3. Press the knife firmly into the

knife attachment to bed it down.

NOTE! The screws in the rear

of the knife attachment are

bonded in place.

NOTE! The knife has a fixed

position and no adjustment

may be done.

4. Tighten the screws (A), with an

alternating tightening torque to 40 Nm.

Sharpening

The third fixed knife is disposable and is changed when necessary.

UGG003/0398 CF Series Granulators

ACCESSORIES 47

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

Žádné komentáře

Conair FC-33 Uživatelská příručka Strana 51